BE 99

It is a paint that forms a seamless, elastic and waterproof layer by drying on the surface on which it is applied

Information

Elastic, Waterproof Exterior Wall Paint

ELASTIC, WATERPROOF EXTERIOR WALL PAINT, It is a paint that forms a seamless, elastic and waterproof layer by drying on the surface on which it is applied. It creates a decorative coating. It is water-based polymer-based, solvent-free and has 300% elasticity. It can be applied on dry or slightly moist surfaces. It is resistant to UV and outdoor weather conditions. It is water-impermeable but has a water vapor permeable structure. It provides the buildings to breathe and prevents moisture, damp with this feature. Thanks to its special formula, it does not keep dirt and preserves its first-day feature for many years. It prevents the carbon dioxide gas formed in the structure and thus protects the equipment in the concrete by reducing the formation of carbonization. It protects the buildings against the effects of rain, dirt, traffic etc. from the external environment. Since it has high elasticity, it is not affected by cracks that may occur on the building surface.

TECHNICAL SPECIFICATIONS

· Type : Water based, acrylic emulsion based, single component

· Density (25°C, g/mL): 1.40 ± 0.10

· pH (25°C) : 7.0 – 9.0

· Viscosity (25°C, mPa.s): 28000 – 32000

· Solid Content (% Weight): 79 ± 2

· Tensile strength (23 ° C, N/mm²): 2

· Elongation at break (23°C): 300%

DOCUMENTS OF THE PRODUCT

CE CERTIFICATE
ISO CERTIFICATE
TSE CERTIFICATE

Color Scheme (Color Tones may vary due to resolution and light differences)

TDS (EN) – ISONEM BE 99

SDS (EN) – ISONEM BE 99

Usage Areas

· All kinds of plaster and painted exterior surfaces,

· Mineral render etc. on old coatings,

· Exterior surfaces, wood, etc.

· In buildings covered with thermal insulation systems,

· For the painting of concrete or prefabricated structures,

· All kinds of plaster and painted exterior surfaces,

· On old coatings like mineral plaster, mill-mixed plaster,

· Exterior surfaces, wood and like surfaces

· In buildings with sheathing,

· For the painting of exposed concrete or prefabricated structures,

Application Type

Surface preparation: Before application, the surfaces must be clean, free of oil, dirt, mud and loose parts should be cleaned. The surface may be dry or slightly humid. It should not be applied on surfaces with salt efflorescence from the negative side. If the application surface has cracks, holes, etc., these should be repaired with ISONEM M03 elastic mortar. If dilatation is present on the surface, it should be filled with ISONEM A4 elastic filler in advance. The appropriate primer selection depending on the surface is made according to the following table. ISONEM UNIVERSAL PRIMER (1: 7 diluted with water – 1 part primer, 7 part water) insulation and paint primer should be applied one layer with 100 – 200 g/m² consumption. The primer is then allowed to dry for 4 hours.

Application method: ISONEM BE 99 is ready to use. We recommend that the product is mixed homogeneously before using it. The application can be made with a brush, roller or a suitable sprayer. After the primer application, ISONEM BE 99 is applied to the surface by two coats, waiting between the coats at least 4 hours and the painting process is finished.