MD 28

Application Type

Surface Preparation : Application surfaces must be clean and wet. If it is dry, it must be moistened without creating pooling. All impurities that affect the adhesion like dirt, oil, sludge, rust, etc. should be removed. If there is any adherence problem of the surfaces, the surface should be primed with ISONEM D 10 Latex before. All segregations or gaps that need repair on the surface should be filled with ISONEM M 03 elastic mortar.

Preparation of the mixture : B component (10 kg) in liquid form is placed in a clean, sufficiently large container. A component (20 kg) of powder is slowly added to the continuous mixing liquid with the aid of a mixer and gently mixed so that no lumps remain. Mixing should be continued for 5 minutes. At the end of the mixing, a homogenous, brushable mortar is obtained.

Application Method : The prepared ISONEM MD 28 should be applied in 3 coats on the surface. It should be made homogeneously and uniformly in vertical layers with the help of a brush. The wet film thickness should not exceed 1 mm at one layer. Wait for a minimum of 4 hours between coats and no interruptions between coats should be allowed for more than 24 hours. The application should not be made at frost or extreme heat, it should be made in the morning chill or evening cool. It is recommended to use with grout detail in chamfer applications.