MS POLIA

ISONEM MS POLIA is a polymer with excellent properties produced in the latest technology. It is ready to use, water-based, polymer-based, UV resistant and elastic structure.

Information

Liquid Polia Polymer

ISONEM MS POLIA is a polymer with excellent properties produced in the latest technology. It is ready to use, water-based, polymer-based, UV resistant and elastic structure. It is used as insulation material on the terrace, roofs, concrete, screed, plaster, wood, metal surfaces and surfaces which were applied spray polyurethane thermal insulation. Workmanship is easy and fast.

Technical Specifications

Density (25°C, g/mL) : 1,30 ± 0,10

pH (25°C) : 7,0 – 9,0

Viscosity (25°C, mPa.s) : 16000 – 18000

Solid content (% Weight) : 70 ± 2

Water transmission rate (kg/ m2. h0,5) : < 0,1 CLASS W3

Adhesion strength by pull-off test (N/mm2) : Crack bridging flexible systems without trafficking ≥ 0,8, with trafficking 1,5 N/mm²

Permeability to water vapour (m) : 5 ≤ SD ≤ 50 CLASS II

Solvent : Water

DOCUMENTS OF THE PRODUCT

CE CERTIFICATE
ISO CERTIFICATE
TSE CERTIFICATE

Usage Areas

Waterproofing of roofs.
Facades
Roofs, woods, decks
On old-based bitumen problematic insulation
Shingle surfaces

Application Type

Surface preparation: The surface to be insulated must be clean and dry. Any dirt, mud, rust or oil, must be removed on the surface. It is not used in areas salt efflorescence or places on water flow from the negative side. All cracks and holes should be repaired with ISONEM M 03. Especially in large spans and thermally insulated floors, we recommend applying 45 g/m² of insulating mesh on floors which are possible to crack. If there is dilatation in the area to be insulated, dilatation insulation should be made with ISONEM A4 elastic filling and then insulation should be started. The appropriate primer selection for surface is made according to the following table. ISONEM UNIVERSAL PRIMER (1: 7 diluted with water – 1 part primer, 7 part water) insulation and paint primer should be applied one layer with 100 – 200 g/m² consumption and then is allowed to dry for 4 hours.

Application method: ISONEM MS POLIA is ready to use should be homogeneously mixed before application. It should not be applied under 5°C or in a wet and frozen floor. Especially in flat roof applications, it should be checked whether the correct and sufficient inclination given. It should be ensured that there is sufficient water drainage and there is no water ponding on the roof or terrace. It is applied to the surface in 2 layers by waiting 4 hours between layers.