SB SUPER COMPONENT

It is a highly resistant insulating coating with strong adhesion, excellent water resistance and UV resistance, consisting of a special mineral filler and polymer

Information

SB Super Component

It is a highly resistant insulating coating with strong adhesion, excellent water resistance and UV resistance, consisting of a special mineral filler and polymer components. ISONEM SB SUPER COMPONENT does not wear due to its structure, unlike other insulation materials. Therefore, it is very suitable for use on concrete roofs, terraces, walkways, asphalt pavements, tennis courts, and sports areas. The product is not affected by UV, snow, rain, water. If required, all kinds of ceramic, marble and similar coating can be applied on it. Economical and long lasting. No harm to human health.

TECHNICAL SPECIFICATIONS

· Type : Water based, acrylic based, single component

· Density (25°C, g/mL) : 1.40 ± 0.10

· pH (25°C) : 7.0 – 9.0

· Viscosity (25°C, mPa.s) : 9000 – 12000

· Solid Content (% Weight) : 74 ± 2

DOCUMENTS OF THE PRODUCT

CE CERTIFICATE
ISO CERTIFICATE
TSE CERTIFICATE

Color Scheme (Color Tones may vary due to resolution and light differences)

SDS (EN) – ISONEM SB SUPER COMPONENT

TDS (EN) – ISONEM SB SUPER COMPONENT

Usage Areas

· Concrete terrace and roof insulation,

· Wet area insulation

· Concrete roads, parks, and gardens

. Hidden gutters, gutter-tile, and soffit.

Application Type

Surface preparation: Firstly the application surface is cleaned from dust, dirt and oil. If there are places that require repairing, it is repaired with ISONEM M03 Elastıc Repair Mortar or ISONEM MS Mortar Repair Mortar. Before application, absorbent substrates should be primed with the ISONEM UNIVERSAL PRIMER (1: 7 diluted with water;1 part primer, 7 parts water). The primer application should be after a minimum drying time of 4 hours.

Application Method: ISONEM SB SUPER COMPONENT is a super component ready to use. The product should be selected as summer or winter according to seasonal conditions. 18 – 40 ° C for summer application, 5 – 17 ° C for winter application. The product is mixed homogeneously with the help of a mixer in the bucket for 5 minutes. After the mixture is made ready, ISONEM SB SUPER COMPONENT is applied to the surface in two coats and perpendicular layers to each other. It should be waited minimum of 4 hours between the coats.