Interior-Exterior Heat Insulation Paint
THERMAL PAINT is an elastomeric resin-based, contains special vacuum microspheres, have vapor-permeability, water-based, a low thermal conductivity, high sunlight absorbency, and high surface heat transmission value. Its activity is scientifically proved special insulating paint which provides the thermal and water insulation in the interior and exterior facades. It provides energy savings to buildings of up to 40% depending on the application layers number in heating and cooling energy costs. When the ISONEM THERMAL PAINT with special vacuum microspheres is used as interior wall paint, it reflects the radiant heat generated inside to the interior environment, and when it is used on the exterior, the incoming radiant heat is reflected back to the outside. When used on roofs, it reflects a minimum 80% of the sun’s rays thanks to its ceramic-reinforced formula. While the water never passes from the film surface applied Isonem Thermal Paint, the moisture inside the building evaporates away from the structure.
· Radiont heat proof.
· Saves up to 40% energy.
· Applicable to internal and external surfaces.
· Labor costs are low and easy to apply.
· It prevents the formation of moisture and mold in the wall.
· It has water and sound insulation feature.
· It has late flammability and nonflammability.
Certification: TSE K 127 THERMAL PAINTS
Class: COLD CLIMATE PAINT
Brightness: N/A (not applied)
Wet abrasion resistance (μm): CLASS II
Covering power (m2/L): CLASS I
Dry film thickness: CLASS E5
Grain size: CLASS S2
Permeability to water vapour (m): CLASS II
Water transmission rate (kg/m2.h0,5): CLASS W3
Crack covering feature (μm): not required, CLASS A0
Carbon dioxide permeability (g/m2.d): not required, CLASS CO
Surface heat transmission value (ԑ): min. 0.80
Sunlight absorbency value (α): 0.820, min. 0.80
Thermal paint surface resistance (RS): 0.0495 ± 1,5%
Heat conductivity coefficient (W/mK): 0.023, λ<0.060
Impact resistance: no cracking & rupture
· Density (25°C, g/mL): 0,85 ± 0.10
· pH (25°C) : 7.0 – 9.0
· Viscosity (25°C, mPa.s): 12500 – 13500